Welcome to Holidaypac Packaging Solutions Factory!
email

tiger@holidaypac.com

Holidaypacfactory custom paper packaging product

+86 136 5233 6188

Welcome to Holidaypac Packaging Solutions Factory!

Churro Boxes with Dip Cup

Get Free Quote

1-2 Days Free Customization

7-12 Days Production Time

12000m2+ Factory Since 2008

Door to Door service

 
HolidayPac Closed black churro box showing the dip cup opening

Design and fit

Fold-flat paperboard boxes carry churros and a dip in one package. Specify the churro length and cup rim diameter when requesting a custom size.

HolidayPac Open churro carton and fitted clear dip cup

Wholesale pricing

CN¥0.0665–0.1993 each. Custom orders start at 5,000 pieces.

Churro length and dip cup fit

Start with the serving you intend to sell. For churros and a portion of dipping sauce, record the length of the longest fried stick, the width of the bundle and the outside rim diameter of the sauce cup. Use the finished portion from the kitchen rather than a recipe dimension. Photograph the portion beside a ruler and label the measurements so the person preparing the drawing can see exactly where each one was taken.

Put the cup in its opening before loading the churros. Its rim must rest on the support without falling through. Close the lid and reopen it to see whether the lid of the cup lifts or rubs against the carton.

Try a short order of three sticks and your largest sharing portion. A box that looks full with the larger portion may leave the smaller order sliding around. A wider carton can accommodate a larger bundle, but it also takes up more space at the collection counter.

A packing trial at the counter

Sugar on the folding tabs makes closing a carton harder during a busy shift. Set the carton beside the finishing station, shake loose sugar off the sticks, and keep the sauce cups within reach. Measure the time from picking up the flat blank to handing over a finished order.

Run a short trial during a normal service period. Give one person the empty packaging, another the food, and a third the finished order. Ask each person to describe any point where the pack has to be held open, turned around or adjusted by hand. Those observations are more useful for a revision than a general request to make the pack larger.

Keep one filled sample at the counter and carry a second through your ordinary pickup route. Open both at the time a customer would begin eating. Compare the appearance of the churros and a portion of dipping sauce, the condition of the contact surfaces and the effort needed to open the pack. Write the observations on the drawing alongside the relevant dimensions.

Artwork and custom printing

Ask for the cup specification as a separate line on the quotation. A photo showing a cup does not tell you whether cups and lids are included in the price. If you already buy a particular cup, send an actual sample before tooling is approved.

Request a cutting and folding drawing for the exact dimensions you approve. Mark the customer-facing panel, the back and the opening direction on a folded blank. Then unfold the blank and compare those marks with the artwork file. A logo can look perfectly centred on a flat drawing yet end up upside down when staff hand the order across the counter.

Supply vector artwork for the brand mark and identify any colours that must match existing printed packaging. Ask for a proof on the selected material where colour is important. Include the smallest type you expect to use, since a proof containing only the large logo will not show whether fine instructions, contact details or small illustrations remain legible.

What to include in a wholesale quotation

Use the wholesale pricing above as a starting point for the selected configuration. Specify the length of the longest fried stick, the width of the bundle and the outside rim diameter of the sauce cup, the number of printed designs, the order quantity per design and the delivery destination. Ask the supplier to show the unit price in CNY and identify which finishing and packing operations are included. A quotation for one design at the full quantity may change if that quantity is split across several designs.

Ask for separate figures for samples, tooling, print preparation, outer packing and freight wherever they apply. Compare two quotations using the same delivery address, quantity and finished specification. To estimate the cost per order served, divide the total delivered cost by the usable quantity and add any separately purchased components that staff pack with each serving.

Before placing a repeat order, reference the approved sample and its revision date. If a drawing, material or print finish changes, record that change alongside the revised quotation. This gives the next buyer a clear record of what the price covered and helps the receiving team recognise the correct version on arrival.

Receiving and storing the order

Agree on the units per bundle and bundles per shipping carton before ordering. Give the supplier the storage limits for your shelves and ask for the outside carton dimensions and packed weight. These figures help a buyer compare deliveries that contain the same number of pieces but require different amounts of storeroom space.

When the shipment arrives, compare a sample from more than one carton with the approved pack. Inspect edges, seams, print alignment and the surfaces that touch food. Assemble or open a sample using the same motions used in your packing trial. Record the carton label and photograph any difference before mixing that bundle with existing stock.

Keep unused packs in their protective wrapping in a clean, dry storage area until needed. Open a manageable quantity for each shift. Put the approved sample or a clear photograph at the packing station so new staff can identify the intended orientation and report any change in fit before an entire batch is used.

Questions buyers ask

Can the same box serve waffle sticks? Use the longest waffle and the thickest topping for a fit test. Waffles can be wider than churros even when the stick lengths look similar. Check that the topping clears the lid throughout closing.

What should we send for a first sample? Send a photograph of churros and a portion of dipping sauce, the portion measurements, the proposed artwork and your usual packing sequence. Say whether the first sample is for checking fit, reviewing colour or both. A plain structural sample can answer a size question, while a printed proof is needed to judge the final artwork.

How can multiple locations approve one specification? Give each site the same sample and the same checklist. Ask sites to record the portion they tested and the step where any difficulty occurred. Consolidate those observations into one marked drawing before asking for revisions, then circulate the approved version to every location.

Product reviews

The linked supplier listing showed no product reviews when checked. Buyers who have used this packaging can use the product review area to share their experience with portion fit, packing and takeaway handling. View supplier product listing.

{“@context”:”https://schema.org”,”@type”:”Product”,”@id”:”https://www.holidaypacfactory.com/product/churro-boxes-with-dip-cup/#product”,”name”:”Churro Boxes with Dip Cup”,”url”:”https://www.holidaypacfactory.com/product/churro-boxes-with-dip-cup/”,”image”:”https://www.holidaypacfactory.com/wp-content/uploads/2026/11/holidaypac-churro-boxes-with-dip-cup-2.webp”,”brand”:{“@type”:”Brand”,”name”:”HolidayPac”},”offers”:{“@type”:”AggregateOffer”,”priceCurrency”:”CNY”,”lowPrice”:”0.0665″,”highPrice”:”0.1993″,”url”:”https://www.holidaypacfactory.com/product/churro-boxes-with-dip-cup/”}}

Related Products

GET FREE QUOTE

Facebook Twitter YouTube Pinterest linkedin

Get a Quick Quote

Leave your request anytime. Our sales team will reply with pricing, samples and production details.