Door to Door service










1-2 Days Free Customization
7-12 Days Production Time
12000m2+ Factory Since 2008
Door to Door service

Size a takeaway platter around a complete order of chicken, fries or pizza. The print and board specification can be selected for the food being packed.

5,000–499,999 boxes: CNY 1.33 each. From 500,000: CNY 0.3321. Logo or pattern customisation listed from an additional CNY 0.0665 per box.
Start with the serving you intend to sell. For chicken, fries or pizza platters, record the widest serving, tallest topping and total packed meal weight. Use the finished portion from the kitchen rather than a recipe dimension. Photograph the portion beside a ruler and label the measurements so the person preparing the drawing can see exactly where each one was taken.
Start with the portion most likely to touch the sides. Position the sides and any separately packed sauces before checking whether the lid closes freely.
A pizza portion needs clear space above the topping, while chicken places more weight on the base. Test both menus if you plan to share one carton across outlets.
Carry the full platter from the packing counter to the collection shelf. Repeat with the same carrier used by delivery staff, checking how the box sits on its base.
Run a short trial during a normal service period. Give one person the empty packaging, another the food, and a third the finished order. Ask each person to describe any point where the pack has to be held open, turned around or adjusted by hand. Those observations are more useful for a revision than a general request to make the pack larger.
Keep one filled sample at the counter and carry a second through your ordinary pickup route. Open both at the time a customer would begin eating. Compare the appearance of the chicken, fries or pizza platters, the condition of the contact surfaces and the effort needed to open the pack. Write the observations on the drawing alongside the relevant dimensions.
Show the printer which face points toward the customer when the lid is opened. Ask for the print charge and base carton price as separate items.
Request a cutting and folding drawing for the exact dimensions you approve. Mark the customer-facing panel, the back and the opening direction on a folded blank. Then unfold the blank and compare those marks with the artwork file. A logo can look perfectly centred on a flat drawing yet end up upside down when staff hand the order across the counter.
Supply vector artwork for the brand mark and identify any colours that must match existing printed packaging. Ask for a proof on the selected material where colour is important. Include the smallest type you expect to use, since a proof containing only the large logo will not show whether fine instructions, contact details or small illustrations remain legible.
Use the wholesale pricing above as a starting point for the selected configuration. Specify the widest serving, tallest topping and total packed meal weight, the number of printed designs, the order quantity per design and the delivery destination. Ask the supplier to show the unit price in CNY and identify which finishing and packing operations are included. A quotation for one design at the full quantity may change if that quantity is split across several designs.
Ask for separate figures for samples, tooling, print preparation, outer packing and freight wherever they apply. Compare two quotations using the same delivery address, quantity and finished specification. To estimate the cost per order served, divide the total delivered cost by the usable quantity and add any separately purchased components that staff pack with each serving.
Before placing a repeat order, reference the approved sample and its revision date. If a drawing, material or print finish changes, record that change alongside the revised quotation. This gives the next buyer a clear record of what the price covered and helps the receiving team recognise the correct version on arrival.
Agree on the units per bundle and bundles per shipping carton before ordering. Give the supplier the storage limits for your shelves and ask for the outside carton dimensions and packed weight. These figures help a buyer compare deliveries that contain the same number of pieces but require different amounts of storeroom space.
When the shipment arrives, compare a sample from more than one carton with the approved pack. Inspect edges, seams, print alignment and the surfaces that touch food. Assemble or open a sample using the same motions used in your packing trial. Record the carton label and photograph any difference before mixing that bundle with existing stock.
Keep unused packs in their protective wrapping in a clean, dry storage area until needed. Open a manageable quantity for each shift. Put the approved sample or a clear photograph at the packing station so new staff can identify the intended orientation and report any change in fit before an entire batch is used.
Which menu should determine the sample size? Use the widest and heaviest orders in separate trials. The portion that needs the most lid clearance can differ from the one that puts the greatest load on the base.
What should we send for a first sample? Send a photograph of chicken, fries or pizza platters, the portion measurements, the proposed artwork and your usual packing sequence. Say whether the first sample is for checking fit, reviewing colour or both. A plain structural sample can answer a size question, while a printed proof is needed to judge the final artwork.
How can multiple locations approve one specification? Give each site the same sample and the same checklist. Ask sites to record the portion they tested and the step where any difficulty occurred. Consolidate those observations into one marked drawing before asking for revisions, then circulate the approved version to every location.
Contact HolidayPac with your menu, destination, target quantity and pack measurements. For repeat orders, include the previous sample reference so the team can compare the approved construction and artwork with the new brief.
The supplier listing shows a product rating of 5.0 out of 5 from three reviews. After using this pack, customers can leave feedback on fit, assembly and handling in the reviews section.
Food packaging, paper bags and food service paper for your next project.
Leave your request anytime. Our sales team will reply with pricing, samples and production details.
Leave your request anytime. Our sales team will reply with pricing, samples and production details.
Tell us what you're packaging and we'll ship a physical sample plus a free 3D mockup within 24 hours — no cost, no obligation.
Your inquiry has been submitted. If you need to follow up, contact us using the email or WhatsApp details on our contact page.